Cuddeback EXCITE Owner's Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
10
Figure 9
Enables/disables camera;
also used to view
information
Set key sets date, time,
delays, etc.
Up key
Down key
General purpose key
What each key does!
used to change
settings, view
information
}
STEP 3 - LEARN THE KEYPAD & DISPLAY
Cuddeback is programmed by using a 2 line LCD dis-
play and 5 keys (Figure 9).
The KEY is used to enable or disable the camera
and to view information. The KEY is used to set
the date, time, delay and other settings. The KEY
& KEY are used to change settings or view
information. KEY is a general purpose key used
for various tasks.
Moving from One Menu to the Next
Press to change settings. Press again to
move to the next setting.
LEARN - To see how this works press multiple times.
Press to view information. Press again to
move to the next display.
LEARN - To see how this works press multiple times.
Figure 10
STEP 4 -
(S KEY) IS FOR SETTING UP CUDDEBACK
is used to change Cuddeback's settings.
With each press of a different setting will be
displayed (Figure 10).
After you view or change the setting press to
view the next parameter.
1) Camera Delay. After taking a picture the camera
will wait this amount of time before arming itself
for the next picture.
Delay
01 min
19
MOTION / HEAT DETECTOR SENSITIVITY LEVEL
The sensitivity of Cuddeback's motion/heat sensor
can be changed.
1) Press numerous times until [Utilities? C =
Yes] is displayed.
2) Press [Sense Level] is displayed (figure 74).
3) Press or to change the setting. Select
one of the following settings.
a) Standard.
b) High. We recommend using this setting.
TIP - Detection performance
varies with air temperatures and
animal size. If you photograph
more small animals than you
would like, or see more blank
images, lower the sensitivity.
Blank images are typically caused
by very fast moving animals and
birds. Setting a sensitivity level of
standard will reduce these occur-
rences. However, because a digi-
tal image does not cost anything,
we recommend using the high
setting and allow for the few blank
images that may occur.
FORMATTING THE COMPACT FLASH CARD
Cuddeback will automatically format the Compact
Flash Card if required. However, you can also
manually format the card.
When to format a Compact Flash Card
1) Format your card when you want to erase all
images and other files on the card.
2) If you experience problems with a Compact Flash
Card formatting the card will generally correct
the problem.
3) If you are using a card that was previously used in
some other product (camera, computer, etc.) you
should format the card before using it.
TIP - Formatting will completely
erase all files from the Compact
Flash card and all IMAGES &
VIDEOS CAN NEVER BE
RECOVERED.
Excite06OwnerManual 6/27/06 2:38 PM Page 10
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comments to this Manuals

No comments