Cuddeback E FAMILY User Manual download pdf (Page 27)

2. RESET is the rst command. Pressing UP

will reset the camera to factory settings. is

command is useful if you think the camera

settings are incorrect. We always recommend

resetting the camera before performing

additional diagnostic steps. Press UP and

conrm and reset the camera.

3. BATTERY level will be displayed next. If

Battery level is LOW or DEAD we recommend

you replace the batteries. Press UP to view the

Battery Image and Battery Day counters.

4. BATTERY LOAD test is next. Press UP to

begin the battery load test. is test will

display a value from 10 (low) to 99 (high).

If the number is below 50 we recommend

you replace the batteries.

5. FILTER veries the camera lter works

correctly. Press UP to test and you should

see the lter move inside the camera.

6. IR LED tests the camera’s illumination

LEDS Press UP to turn on the LEDs.

NOTE: for Black Flash you will not be able

to see the LEDs turn on. Use a cell phone

camera to view the LEDs. (Note – some

cell phones, like the iPhone 5S, will not

display the IR LEDs.)

7.

SD CARD veries your SD card is functioning.

Press UP to test your SD card. is test will

write a le to the SD card and read it back to

verify the SD card is functional.

8. IMAGE - Press UP or DOWN to take a still

image. You can view this image on your PC

or other viewing device to assure it is OK.

9. VIDEO - Press UP or DOWN to record a

video. You can view this video on your PC

or other viewing device to assure it is OK.

For additional product support visit http://support.

cuddeback.com. You can also email us your ques-

tions by visiting http://cuddeback.com/email.

50 51

1 2 ... 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments