Cuddeback NoFlash Owner's Manual download pdf (Page 27)

3) Press . The display will prompt [Owner PW

Change?]

4) Press again. The display will prompt

[Lock

PW Change?]

(figure 40).

5) Press . The display will prompt

[Owner PW

<0 >]

6) Enter the owner password using the method pre-

viously described. After all 5 numbers are entered

press . If you did not program the owner

password you need to enter the default owner

password

00000.

Step 2 - Enter the 5 numbers you want for the lock

password

7) The display should be [New LPW <0 >] (figure

41). (LPW is the abbreviation for Lock Password).

8) Enter the 5-digit number password you desire

using the method previously described.

9) After all 5 numbers are entered press . The

display will prompt

[RepeatPW <0 >]

(figure 42).

Step 3 - Repeat the 5 numbers for the lock

password

10) Enter the 5-digit number again then press .

11) If both sequences of numbers are identical the

display will prompt

[Saved!] (figure 43). If the

saved message does not appear then the pass-

word was not programmed and you will have to

repeat the process.

12) Press to continue to set the User Name.

TIP - You can cancel setting the

password at any point before

Saved! is displayed by pressing (S).

To disable password protection

program the Lock and Owner pass-

word with 00000 (five zeros).

New LPW

<0 >

Figure 41

Repeat PW

<0 >

Figure 42

Lock PW

Change?

Figure 40

ENTERING THE OWNER NAME

You can program 16 characters that will be printed

onto the image. This can be your name or the

location of where the camera is setup.

Step 1 - Enter the owner password to enable

changing the owner name

1) If you have just programmed the Passwords, the

Owner Name will be displayed. If not, perform

steps 2 and 3.

2) Press numerous times until

[Theft Stop? C =

Yes]

appears on the LCD.

3) Press . The display will prompt

[Owner PW

Change?]

4) Press numerous times until

[Enter Owner

Name Change?]

is displayed (figure 44). (If you

previously programmed the owner name that text

would be displayed on line 1).

5) Press . The display will prompt

[Owner PW <0 >].

6) Enter the owner password using the method pre-

viously described. After all 5 numbers are entered

press .

Saved!

Figure 43

TIP - Instead of programming your

name into Cuddeback, you can pro-

gram any text, such as location.

This will allow you to identify the

location of the images.

Enter Owner

Change?

Figure 44

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Comments to this Manuals

No comments

Cuddeback NoFlash Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for Bridge cameras Cuddeback NoFlash