Cuddeback Expert Owner's Manual download pdf (Page 14)

SETTING THE LOCK PASSWORD

The method to set the lock password is similar

to setting the owner password. To change the

lock password you must first enter the owner

password. The default owner password is

00000. If you changed the owner password,

you will need to enter that password instead.

Step 1 - Enter the owner password to enable

changing the lock password

1) If you have just programmed the Owner

Password, the Lock Password will be dis-

played. If not, follow steps 2 and 3.

2) Press numerous times until [Theft

Stop? C = Yes] appears on the LCD.

3) Press . The display will prompt [Owner

PW Change?].

4) Press again. The display will prompt [Lock

PW Change?] (figure 40).

5) Press . The display will prompt [Owner

PW <0 >].

6) Enter the owner password using the method

previously described. After all 5 numbers are

entered, press . If you did not program the

owner password, you need to enter the default

owner password 00000.

TIP - For the best security you

should use different numbers for

the owner and lock passwords.

27

Lock PW

Change?

Figure 40

26

LEARN - You have now successfully

entered the default Owner Password of

00000. You can cancel setting the

Owner Password at this time by press-

ing (M). If you want to continue and

set your Owner Password, continue as

described next.

c. Press to advance to the next digit.

00 will be displayed.

d. Press three more times. A 0 will be

added to the display each time is

pressed.

e. When five 0s are displayed, press .

5) The display will prompt [New OPW <0 >]

(figure 38). (OPW is the abbreviation for

Owner Password).

Follow these steps to continue to program the

owner password.

Step 2 - Enter the 5 numbers you want for the

owner password

6) The display should be [New OPW <0 >]. If

not, repeat steps 1 through 5 above.

7) Enter the 5-digit number password you desire

using the method described in step 4 above.

8) After all 5 numbers are entered press .

The

display will prompt [RepeatPW <0 >]

(figure 39).

Step 3 - Repeat the 5 numbers for the owner

password

9) Enter the 5-digit number again, then press .

10) If both sequences of numbers are identical the

display will prompt [Saved!]. If the saved mes-

sage does not appear, the password was not

programmed and you will have to repeat the

entire process.

11) Press to continue to set the Lock Password.

LEARN - When setting a password,

(DOWN) changes the number and

(UP) advances to the next position.

New OPW

<0 >

Figure 38

Repeat PW

<0 >

Figure 39

TIP - You can cancel setting the

password at any point before

Saved! is displayed by pressing (S).

Expert07OwnerManualReader.qxd 11/6/07 3:39 PM Page 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Comments to this Manuals

No comments