Cuddeback Expert Owner's Manual download pdf (Page 23)

MOTION / HEAT DETECTOR SENSITIVITY LEVEL

The sensitivity of Cuddeback's motion/heat sensor

can be changed.

1) Press numerous times until [Utilities? C =

Yes] is displayed.

2) Press [View Quality] is displayed.

3) Press [Sense Level] is displayed (figure 74).

4) Press or to change the setting. Select

one of the following settings.

a) Low

b) Standard

c) High. We recommend using this setting.

d) Auto will program Cuddeback to automatically

change the sensitivity level for day or night

activity. This limits Cuddeback's detection

range to the distance of the camera's flash.

TIP - Detection performance

varies with air temperatures and

animal size. If you photograph

more small animals than you

would like, or see more blank

images, lower the sensitivity.

Blank images are typically caused

by very fast moving animals and

birds. Setting a sensitivity level of

low or standard will reduce these

occurrences. However, because a

digital image does not cost any-

thing, we recommend using the

high setting and allow for the few

blank images that may occur.

TAKING A PICTURE MANUALLY

You can manually take a picture with Cuddeback.

1) Press until [Utilities? C = Yes] is displayed.

2) Press . The display will prompt [View Quality].

3) Press two times. [Take Picture? C = Yes] is

displayed. (figure 75)

4) Press to take a picture. Press to continue

without taking a picture.

5) If you press , the display will show [Pending]

and the red LED will flash. In about 20 seconds

the camera will record an image. (figure 76)

Sense Leve

High

Figure 74

Take Pictu

C = Yes

Figure 75

Take Pictu

Pending

Figure 76

44

6) If you want to record an image without wait-

ing 20 seconds, press again to record the

image immediately.

7) When the image is complete, you can press

to continue.

FORMATTING THE COMPACT FLASH CARD

Cuddeback will automatically format the

Compact Flash card if required. However, you

can also manually format the card.

1) Press until [Utilities? C = Yes] is

displayed.

2) Press . The display will prompt [View

Quality].

3) Press numerous times until [Format

Card? C = Yes] is displayed.

4) Press if you want to format the Compact

Flash card. Press to continue without

formatting the card.

5) The display will show [Confirm? C = Yes].

6) To confirm that you really want to format the

card, press again.

7) [Please wait] will be displayed. When for-

matting is complete [DONE] will be displayed.

TIP - Formatting will completely

erase all files from the Compact

Flash card and all IMAGES &

VIDEOS CAN NEVER BE

RECOVERED.

45

Expert07OwnerManualReader.qxd 11/6/07 3:40 PM Page 23

1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments