Cuddeback NoFlash Owner's Manual download pdf (Page 25)

8) After all 5 numbers are display press . The

display will prompt [RepeatPW <0 >] (figure 39).

Step 3 - Repeat the 5 numbers for the owner password

9) Enter the 5-digit number again then press .

10) If both sequences of numbers are identical the

display will prompt

[Saved!]. If the saved mes-

sage does not appear then the password was not

programmed and you will have to repeat the

entire process.

11) Press to continue to set the Lock Password.

SETTING THE LOCK PASSWORD

The method to set the lock password is similar to

setting the owner password. To change the lock

password you must first enter the owner password.

The default owner password is

00000. If you

changed the owner password you will need to enter

that password instead.

Step 1 - Enter the owner password to enable

changing the lock password

1) If you have just programmed the Owner

Password, the Lock Password will be displayed.

If not, follow steps 2 and 3.

2) Press numerous times until

[Theft Stop? C =

Yes]

appears on the LCD.

TIP - You can cancel setting the

password at any point before

Saved! is displayed by pressing (S).

TIP - For the best security you

should use different numbers for

the owner and lock passwords.

Repeat PW

<0 >

Figure 39

Step 2 - Enter the characters you want for the

owner name

7) The display will change to [A ]

(figure 45).

a. Press . The A will change to a B.

b. Press numerous times. The

B will contin-

ue to increment. Keep pressing to see all

the available characters.

c. Once the character you want is displayed,

press to advance to the second position.

d. Press to change the second character.

Continue to press until the character you

desire is displayed. Then press to

advance to the next position.

e. Continue repeating step D until you have

completed entering the text you desire.

f. Enter up to 16 characters that you desire using

this method.

g. After you have entered the text you desire,

press .

[Saved!] will be displayed and the

text you entered will be saved in Cuddeback's

memory

(figure 46)

LEARN - When entering the owner name (DOWN) changes

the letter and (UP) advances to the next position.

TIP - You can program a space

between your first and last name.

Press (DOWN) until no character is

displayed. Then press (UP) to

advance to the next position.

You don't have to enter characters

in all 16 positions. At any time you

can finish by pressing (C).

You can cancel entering the Owner

Name at any point before Saved! is

displayed by pressing (S).

You can erase the Owner Name by

programming all spaces. To do this

program the Owner Name, change

the first position to a blank, all the

other positions will be blank already,

then press (C).

Saved!

Figure 46

Figure 45

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Comments to this Manuals

No comments

Cuddeback NoFlash Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for Bridge cameras Cuddeback NoFlash